Kestrel e220i-HV 800W Wind Turbine, 3 Blade, 200VDC, 30242

e220 (800W) The Kestrel e220 employs a unique variable-pitch 2.2 meter (7.2’) fiberglass rotor driving a discoid axial flux alternator, which allows for high low wind efficiency and full rated power output in all winds at or above 12 M/S (25.76 MPH) without energy-robbing yawing or electronic shutdown. Because of its large swept area and high efficiency, the e220 is a great choice for low wind sites, yet is equally at home in high winds. Suggested uses include battery charging, direct water pumping, resistance heating and utility inter-tie (with an approved inverter). For all wind related literature and downloads, go to our Wind Power Downloads page. Specifications Rated Output: 800W Maximum Power: 850W at 13ms-1 Rated Wind Speed: 12.5ms-1 Cut in Windspeed: 2.5ms-1 Rotor Diameter: 2.2m Number of Blades: 3 Blade Material: Fiber glass Tower Top Mass: 45kg Tower Height: 9-15m Tower Type: Scissor or Guyed Overspeed Protection: Pitch Control Generator Type: Permanent-magnet Axial flux brushless Output Voltage: 12, 24, 36*,48, 110* and 200 Vdc Controller Type: Charge or Dump *Available on request. The Kestrel e220 produces a maximum power of 850W.