Apollo Solar T-80 MPPT Charge Controller, 80A, 24/36/48 VDC,

The Apollo Solar T80 TurboCharger and T80HV TurboCharger are premium MPPT charge controllers designed especially for large power systems. The T80 and T80HV integrate Maximum Power Point Tracking, battery charge management, state of charge information and communications into a single device. With 80 Amps continuous output, they have the largest capacity in the industry. The T80HV is the only MPPT charge controller that works with the newer higher voltage PV modules. For example, the SANYO HIT BA19 200 modules have a Vmp of 51.75v at 50ºC which will not charge a 48 volt battery, but they generate up to 79.88 volts open circuit at -40ºC. Two of these modules in a series string will generate 103 volts at Vmp, but the Voc is almost 160 volts, which will destroy 140/150 volt charge controllers. The T80HV is designed to operate up to 200 Voc and 160 Vmp and works with the SANYO HIT modules. 5-year warranty. Apollo Solar Apollo Solar Wireless Remote Display In a convenient, portable unit, the Apollo Solar Wireless Remote Display monitors the PV-Battery System from anywhere by tracking power production and consumption and then calculating the energy remaining in the battery. The data showing the comprehensive status of the PV Array, the controller, and the battery system is transmitted via WiFi from the battery energy meter that is built into the Apollo Solar T80 charge controllers. Available in two models, the RD100 and the RD300, the Wireless Remote shows State-of-Charge (SOC) in Percent Full, Amp-Hours, and Bar-Graph format, an easy-to read “gas gauge” essential for optimal performance of battery-based systems. Also displayed are the PV current and voltage as well as the battery charge/discharge amps. Apollo Solar Wireless Remote Display Part # Model Battery Voltage Vdc PV Amps Max. Voc Dimensions Shipping Weight 304001 T80 12 to 48 70 140 15.3 x 8.3 x 4.2 22 304014 T80HV 12 to 48 70 200 15.3 x 8.3 x 4.2 22 Part # Model Distance Range SD Memory Card Environmental Rating Dimensions Weight 304003 RD100 300 ft outside/ Up to 2.0GB Indoor Type 1 7 x 4 x 2.5 1.4 100 ft in buildings 304009 RD300 1 mile outside/ Up to 2.0GB Indoor Type 1 7 x 4 x 2.5 1.4 300 ft in buildings 304004 Wired 1000 feet (Cat5 cable) Up to 2.0GB Indoor Type 1 7 x 4 x 2.5 0.75 304006 ASNET Network Kit includes Network option card and a 7’ CAT5 cable - 1 kit required per parallel T80 ?? 304002 Battery Temperature Sensor 1.0 Apollo Solar T80 Turbocharger Features include: • Up to 16 T80’s or T80HV’s can be paralleled for higher currents • Continous power rating up to 45°C • Patent pending MPPT • Supports flooded lead-acid, gel & absorbed-glass-mat batteries in 12, 24, 36 & 48 Vdc configurations • Four-stage charging with adjustable set points for all parameters • Built-in energy monitors using TriMetric Technology • Wireless remote communications including system data monitoring (see below) • Firmware updates via the full-featured Apollo Solar Remote Data Display and the Internet. Installers like the integrated energy monitor, the automatic one-minute set-up, the fail-safe calculated defaults, the optimized MPPT energy harvest, the Wireless Remote Display, and the 80/100 Amps at higher temperatures. The internal temperature-controlled variable speed fan runs just fast enough to maintain optimum reliability.